BTMGS - PU/TC FLAT WHITE 595B-37925, 663-18-0001
- MSDS: BTMGS
- Manufacturer: AKZO COATINGS INC
- Product Name: PU/TC FLAT WHITE 595B-37925, 663-18-0001
- National Stock Number: 8010-00N044841
Product Identification
Product ID:PU/TC FLAT WHITE 595B-37925, 663-18-0001
MSDS Date:10/30/1992
FSC:8010
NIIN:00N044841
MSDS Number: BTMGS
Responsible Party
ORANGE, CA 92665
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 714-637-1750
Cage: 98502
Contractor
Telephone: 714-637-1750; CHEMTREC 800-424-9300
Cage: 98502
Ingredients
ACETIC ACID, 2-METHOXY-1-METHYLETHYL ETHER;
CAS: 108-65-6
RTECS: AI8925000
Fraction By Weight: 15-25%
OSHA PEL N/K
ACGIH TLV: N/K
HYDROXYLATED SILICON DIOXIDE
CAS: 112926-00-8
Fraction By Weight: 10-15%
OSHA PEL 10 MG/M3 (MFR)
ACGIH TLV: 10 MG/M3 (MFR)
AMORPHOUS SILICA
CAS: 112926-00-8
Fraction By Weight: 5-10%
OSHA PEL 6 MG/M3 (MFR)
ACGIH TLV: 10 MG/M3 (MFR)
3.96 LBS/GAL.
RTECS: 9999999VO
Fraction By Weight: SEE ING
OSHA PEL N/K
ACGIH TLV: N/K
83
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 20.7%
OSHA PEL 200 PPM;300 PPM STEL
ACGIH TLV: 200 PPM;300 PPM STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 15-25%
OSHA PEL 10 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY CAUSE EYE BURNS. HARMFUL IF
SWALLOWED. CAN BE ABSORBED THRU SKIN. MAY CAUSE NOSE & THROAT
IRRIT. CAUSES SKIN IRRIT. MAY CAUSE LUNG INJURY. MAY AFFECT
BRAIN/NERV SYS, CAUSING DIZZ, HDCH/NAUS. HARMFUL IF INHALED. OTHER
EFTS OF OVEREXP MAY INCLUDE:DROW, DIZZ, EDEMA, NARCOSIS, DRYING OF
NASAL (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:MUCOSA, DERM, INFLAMM OF MUC MEMBS OF
NOSE & THROAT. CHRONIC:RPTD OVEREXP TO THIS PROD MAY CAUSE:LIVER
ABNORMS, LUNG DMG, EYE DMG, KIDNEY DMG. NOTICE:RPTS HAVE ASSOC RPTD
& PRLNG OVEREXP TO S OLVS W/PERM BRAIN & NERV SYS DMG. INTENTIONAL
MISUSE BY DELIB CONCENTRATING & INHALING CONTENTS OF THIS PACKAGE
(SUPDAT)
Medical Cond Aggravated by Exposure:PULMONARY CONDITIONS.
First Aid
First Aid:SKIN:FLUSH W/WATER FOR AT LEAST 15 MINUTES & GET MEDICAL
ATTENTION. REMOVE CONTAMINATED CLOTHING & WASH BEFORE REUSE. REMOVE
& DESTROY CONTAMINATED SHOES. EYE:FLUSH W/WATER FOR AT LEAST 15
MINUTES & G ET MED ATTN. INHAL:REMOVE TO FRESH AIR.IF NOT
BREATHING, GIVE ARTIFICIAL RESPIRATION, PREFERABLY MOUTH-TO-MOUTH.
IF BREATHING IS DIFFICULT, GIVE OXYGEN. GET MED ATTN. INGEST:GET
MED ATTN IMMED.
Fire Fighting
Flash Point Method:CC
Flash Point:25.0F,-3.9C
Lower Limits:1.3%
Extinguishing Media:FOAM, CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER MAY BE INEFT IN FIGHTING FIRE. IF WATER IS USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP, (SUPDAT)
Unusual Fire/Explosion Hazard:DURING EMERGENCY CONDITIONS, OVEREXPOSURE
TO DECOMPOSITION PRODUCTS MAY CAUSE HEALTH HAZARD; SYMPTOMS MAY NOT
BE IMMEDIATELY APPARENT. OBTAIN MEDICAL ATTENTION.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. WEAR
APPROPRIATE SAFETY EQUIPMENT AS LISTED IN SAFE HANDLING & USE
INFORMATION SECTION. ABSORB ON INERT MATERIAL & DISPOSE OF AS
BELOW.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. STORE AWAY FROM IGNITION SOURCES. ALL EQUIPMENT SHOULD BE
GROUNDED. AVOID CONTACT W/COPPER, BRASS & BRONZE.
Other Precautions:STORE IN WELL-VENTILATED AREA. STORE IN A CLEAN, DRY
AREA. EMPTY CONTAINER MAY RETAIN PRODUCT RESIDUES (VAPOR OR
LIQUID). ALL PRECAUTIONS MUST BE OBSERVED.
Exposure Controls
Respiratory Protection:WEAR AN APPROPRIATE, PROPERLY FITTED NIOSH/MSHA
APPROVED RESPIRATOR DURING APPLICATION & HANDLING UNLESS AIR
MONITORING DEMONSTRATES VAPOR/MIST LEVELS BELOW APPLICABLE LIMITS.
FOLLOW RESPIRATOR MFR'S RECOMMENDATIONS FOR SELECTION & USE.
Ventilation:SUFFICIENT VENTILATION MUST BE PROVIDED TO MAINTAIN
AIRBORNE CONCENTRATIONS BELOW TLV, PEL & LEL LIMITS.
Protective Gloves:CHEM RESIST GLOVES. CHECK W/ (SUPP DATA)
Eye Protection:ANSI APPVD SPLSH-PRF CHEM GOGGLES
Other Protective Equipment:SUITABLE CLOTHING SHOULD BE WORN TO PREVENT
SKIN CONTACT. ANSI APPROVED EYE BATH & SAFETY SHOWER SHOULD BE
PROVIDED(FP N
Work Hygienic Practices:GOOD PERSONAL HYGIENE PRACTICES ARE REQD AT ALL
TIMES WHEN HNDLG CHEMS. THESE PRACTICES INCLUDE, BUT ARE NOT
LTD(SUPDAT)
Supplemental Safety and Health
FIRE FIGHT PROC:FOG NOZZLES ARE PREFERRED. EFTS OF OVEREXP:MAY BE
HARMFUL/FATAL. PROT GLOVES:GLOVE MFR TO DETERMINE PROPER GLOVE
TYPE. HYGIENE PRACT:TO, WASHING WHEN SAFETY EQUIP IS REMOVED, AT
END OF EACH SHIFT/WHEN GOING ON BREAKS & ESP IF CONTAM OCCURS.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:>175F,>79C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.25
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:LIQUID.
Percent Volatiles by Volume:54.53
Stability
Stability Indicator/Materials to Avoid:YES
ALDEHYDES, CHLORINATED SOLVENTS, ACIDS, OXIDIZERS, ALKANOLAMINES,
HYDROGEN FLUORIDE, AMINES, AMMONIA.
Stability Condition to Avoid:TEMPERATURES >140 DEGREES, SPARKS, OPEN
FLAMES.
Hazardous Decomposition Products:OXIDES OF CARBON.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
REGULATIONS. INCINERATION IS THE PREFERRED METHOD OF DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.